Current position:Orient > IEC BS > IEC P-15-Y ceramic pin insulator
IEC P-15-Y ceramic pin insulator,pin type porcelain insulators

 IEC P-15-Y ceramic pin insulator or porcelain pin type insulators shall be made of good commercial grade wet-process porcelain. The surface of the pin type porcelain insulators shall be effectively glazed except for the points on which the porcelain is supported during firing which may be left unglazed as indicated.

porcelain pin type insulator                            IEC P-15-Y ceramic pin insulator

IEC P-15-Y ceramic pin insulator or porcelain pin type insulators advantages:
According to analysis pin type porcelain insulators materials, IEC ceramic pin type insulator have some advantages shown following:
1. The ceramic insulator has a wide scope of application: Contactors, disconnectors, equipment transformers, condensers, grommets also with extreme surface, atypical insulators (filters)
The features of high plasticity during production, the possibilities of precision grinding and quite easy cementation and bonding with excellent mechanical properties permit that a multitude of shapes be created and used in any type of application.
2. The ceramic insulator is suitable for extreme hot/cold changes in the environment. It is suitable for environments with dust, salt and high moisture, or for combination of all of the above
The highly glazed surface gives the product better self-cleaning properties in high-pollution areas. The product shows stable results in charges and short-circuit in this type of environment; it is highly resistant to corrosion in acidic as well as caustic environments.
3. The ceramic insulator does not suffer from defects in the ceramics-to-metal interface
The combination of the ceramic insulator with cast-iron or aluminium structures using traditional cementing agents is resistant to transition phenomena during the discharge or brush discharge.
4. The ceramic material offers very high mechanical strength under pressure and hardness
The ceramic insulator does not deform unless external force is deployed. Long useful life can be guaranteed of lengths up to 40 years. Therefore, many users have provided long-term operational references in a number of applications.
5. The design is modified to suit the environment
The product offers many shapes during production; glazing uses a wide scale of colours based on the needs of the customer, for example grey or sky blue.
6. The ceramic insulator is nicer to the eye
It has a timeless design.r frequency withstand test and dry flashover test, wet one minute power frequency withstand test and wet flashover test and Power frequency puncture withstand test and mechanical failing load.

IEC P-15-Y ceramic pin insulator / pin type porcelain insulatorsparameters:

Type  
P-15-Y
Nominal voltage-kV
kv
15
Creepage distance-mm
mm
298
Low frequency
voltage-kV
Dry flashover
kv
80
Wet flashover
kv
55
Dry withstand
kv
70
Wet withstand
kv
50
Puncture
kv
150
Impulse
Flashover-kV
Pos.
kv
130
Neg.
kv
175
Radio influence
voltage
Test voltage to ground-KV
kv
15
Max. RIV at 1000kHz-μv
μv
100
Cantilever failing load-kN
kN
11

IEC P-15-Y ceramic pin insulator or pin type porcelain insulators images & voltage:
Our company does all sets of porcelain pin type insulators and supplies many insulator drawings, Welcome to visit our factory and ask the IEC P-15-Y ceramic pin insulators price.Some of these voltage means rated voltage such as 11kv, 22kv, 33kv, but some of the voltage means system voltage such as 12KV, 24KV, 36KV.

 

Relative Articles:
Which material is made in pin insulator?
Manufacturing process of ball pin insulator
Porcelain insulators,pin insulators,post insulators
Porcelain pin insulators specifications
Large steel spindle for pin insulator
Side tie of pin insulator

Copyright ©Zhengzhou Orient power Co.,Ltd. All Rights Reserved. sales@orientinsulators.com
Orient Power is a pin insulator manufacturer of porcelain pin type insulator and composite pin insulators.