Current position:Orient > Model > Pin type insulator specification
Pin type insulator specification

Pin type insulator specification sets out the requirements for the manufacture, testing and delivery of overhead line porcelain and glass insulators for use on overhead electricity distribution and sub-transmission systems in a totally exposed environment.

Pin type insulator

Pin type insulator

The Pin type insulators shall be designed, manufactured and tested in accordance with the relevant parts of the following Standards and all amendments issued from time to time except where varied by this specification.

AS 1112 metric hexagon nuts, including thin nuts, slotted nuts and
castle nuts
AS 1154 Insulator and conductor fittings for overhead power lines
AS 1214 Hot - dip galvanized coatings on threaded fasteners
AS 4680 Hot-dipped galvanized coatings on ferrous articles
AS 1824 Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV
AS 1832 Iron castings - Malleable cast iron
AS 2700 Colour standards for general purposes
AS 2947 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V ac.
AS 3608 Insulators - Porcelain and glass, pin and shackle type – Voltages not exceeding 1000 V a.c.
AS 3609 Insulators - Porcelain stay type - Voltages greater than 1000 V a.c.
AS/NZS ISO 31000-2009 Quality systems - Risk management
AS 4899 Pin insulators- porcelain and glass for overhead power lines voltages greater than 1000Vac
AS/NZS ISO9002 Model for quality assurance in production, installation and servicing
BS 1598 Ceramic insulating materials for general electric purposes
IEC 60575 Thermal-mechanical performance test and mechanical performance test on string insulator units
IEC 60305 Insulators for overhead lines with nominal voltage above1000V Ceramic or glass insulator units for a.c. systems- Characteristics of insulator units of cap and pin type insulator
AS 60372 Locking devices for ball and socket couplings of string insulator units-Dimensions and tests
AS 60471 Dimensions of Clevis and Tongue couplings of string insulator units
AS 60120 Dimensions of Ball and Socket couplings of string insulator units
AS IEC 60720 Characteristics of line post insulators
AS/NZS ISO9001 Quality Management Systems – Requirements

 

Relative Articles:
pin type composite insulator
340 mm crepage distance pin type polymer insulator

Copyright ©Zhengzhou Orient power Co.,Ltd. All Rights Reserved. sales@orientinsulators.com
Orient Power is a pin insulator manufacturer of porcelain pin type insulator and composite pin insulators.