Pin type insulators transmission line can be seen everywhere, the Telegraph poles both of road sides, or living home. Pin type insulators transmission line voltage is usually below 36kV, the bigger, and the heavy, not easily to install.

Pin Insulators according to IEC, ANSI and other standards are used in distribution and transmission lines. Pin type insulators are subjected to compression, cantilever and torsional loads during service.

Highly resistant to lightning puncture, Orient pin type insulators manufactures a wide range of low and high voltage Pin Insulator designed for distribution and sub transmission circuits. The versatile neck designs in “C, F, K and J,” side and top grooves, allow the acceptance of large – diameter conductors to permit easy tying. All neck sizes conform to industry standards allowing factory – formed ties to be used. We have three types for this insulator, glass pin insulator, porcelain pin type insulator and composite pin insulator.

We are the prime manufacturer and exporter of ceramic  pin type insulators, which are featured with 11KV/22KV/33KV. The offered Pin Insulators are made of high-grade wet process and are normally brown glazed, which ensures their safety and efficiency. We fabricate them with immense precision and care so that clients can gain more through their high functional utility. Based on that, we have settled ourselves in the lap of many nationwide countries.

Relative Articles:
IEC BS 900mm creepage distance porcelain pin insulator
Composite polymer pin insulators medium voltage
Porcelain grey glazed pin insulator